The biggest attraction of a 35mm single lens reflex camera is its versatility. Not only is it a useful piece of equipment in its own right, but it can be the ‘heart’ of a complete camera outfit. You can add things like extra lenses, filters, a flashgun, a tripod, as and when you feel you need them, to help you get the results you want.
Smaller items—a blower brush for cleaning lenses, or a cable release, for example—also form part of the serious photographer’s equipment as the collection builds up. And, of course, you will need a gadget bag, or a carrying case to keep everything in. Read the rest of this entry »
A camera which is reasonably compact, easy to operate, and can take a whole range of lenses opens up dozens of new possibilities for any photographer. Telephoto lenses for sports action pictures and better portraits, wide- angle lenses for depth in sweeping landscapes and pictures in cramped spaces, or close-ups of insects using a macro (close-focusing) lens. The pentaprism SLR camera can provide all these things. It is the most popular interchangeable lens camera, widely used by amateurs and professionals alike. There are others with interchangeable lenses—for example medium format SLR cameras and some viewfinder cameras—and these are discussed in detail later on. Read the rest of this entry »
Even the most accurate through the lens exposure meter can be fooled by a subject surrounded by large dark or light areas, subjects which are predominantly back lit, or those against unusual backgrounds. These can influence the meter, providing false information about the light level. Thus the main subject is over-exposed if the meter reacts to a large expanse of black background and, conversely, underexposure of the subject results if it is back lit or surrounded by a large bright area. Read the rest of this entry »
This is usually found on a camera top plate. The index shows the exact location of the film within the camera and thus enables accurate measurements and calculations to be made. It is most useful for close-up work when you may want to measure bellows extension or extension tubes to help you work out magnification and exposure. Close-ups are difficult to focus with a non-reflex camera because the focus cannot be checked through the viewfinder. Instead the distance from the subject to the film must be measured accurately. Some cameras which do not have a film plane index have a serial number engraved on the top plate. The top of the figures often corresponds to the location of the film plane inside the camera. Read the rest of this entry »
A few sophisticated automatic cameras have a dual metering system, one to provide guidance to the photographer in the form of a viewfinder exposure display, while the other system takes a reading of light reflected from the film plane during exposure. The Olympus OM2n is an example where CdS cells provide viewfinder information while silicon cells control the exposure when the camera is set to automatic. Read the rest of this entry »
Choosing the best exposure for a picture is just as important as getting the image sharp. A beautiful holiday picture on the beach is spoiled if you cannot see details of the people in the photographs—they may be too light or dark.
A correctly exposed negative or slide will have a full range of tones from deep shadows to bright highlights. Under-expose your photograph and the darker parts of the picture will contain little detail; over-expose, and the bright parts will appear all washed out and lacking in detail. Read the rest of this entry »
Basically, there are two main types of shutter: those that work inside or just behind the lens, known as between lens shutters, including sector shutters; and focal plane shutters, which are positioned close to the film.
The between lens shutter closely resembles the aperture and is positioned between the lens elements, near the aperture blades. It is made up of two or more overlapping metal blades. which spring open for the time of the exposure and then close again. These shutters are very light and compact, and can synchronize with flash at all speeds. But between lens shutters have two drawbacks: few work at speeds of over 1/500, and they are costly to produce for cameras with interchangeable lenses. This is because each lens requires its own integral shutter and a separate means to block light from the film when the lens is removed.
Between lens shutters are used mainly on rangefinder 35mm cameras and roll film cameras. Read the rest of this entry »
When you open the back of a camera to change the film, look inside and then press the shutter release. As the shutter opens the aperture can be seen beyond it. This shows more clearly if you look through the front of the lens or, on a camera with interchangeable lenses, take the lens off and look through that. Turn the aperture control and the size of the aperture will alter within the lens as you change the settings.
As the size of the aperture changes, so does the brightness of the light allowed through the lens. Aperture size, and therefore brightness, is controlled by the iris diaphragm, made up of a number of thin, interleaving blades which rotate to make the aperture larger or smaller. Making it smaller (stopping down the lens) reduces the amount of light reaching the film; increasing the size allows more light through. Read the rest of this entry »
Specific failure symptoms include: 1) Little or no water enters the washer. 2) The washer does I not complete the washing cycle. 3) The washer drive motor does not run during cycle. To find the cause of the problem, first check to be sure both the hot and cold water faucets are turned on at the wash station.
To avoid any incorrect readings when using the volt/ohmmeter, always “zero” the ohmmeter scale of the volt/ohmmeter before making any continuity checks on components. See operating instructions that came with the volt/ohmmeter. Read the rest of this entry »
If the washer is not spinning, the next check is of the washer control magnet. Washers use a control magnet, an electrical-mechanical component, to enable the gearcase to shift into the spin cycle. You can easily check the control magnet by using the volt/ohmmeter set on the RX-10 scale. With the volt/ohmmeter on RX-10 scale, connect the probes to both terminals of the control magnet. NOTE: When checking a suspected faulty control magnet, remove the wires from the washer wiring harness to avoid an inaccurate reading. Read the rest of this entry »
