Specific failure symptoms include: 1) The washer won’t complete the wash or spin cycle. 2) The washer has a burning smell during the wash and spin cycle. 3) The washer leaves water in the tub at the end of the cycle.
Check the washer power cord for a possible loose connection at the wall plug receptacle.
Check to see if the wall receptacle is defective or has burned or oxidized contacts. If so, the repair should be made by a licensed electrician. Read the rest of this entry »
Specific failure symptoms include: 1) Washer advances through the cycle but leaves water in the tub, or 2) The washer pumps all of the water out of the tub but clothes are wet at end of the cycle.
Check to be sure the washer lid is securely closed. Most automatic washers are designed to shut OFF if the washer lid is in the “up” position. This is a safety feature designed to prevent injury if the lid is opened while the washer is running and spinning.
Check to make sure that the washer power cord has not worked loose in the wall receptacle. A faulty connection could be the cause of washer failure. Read the rest of this entry »
Specific failure symptoms include: 1) Washer fills with water, and motor starts to run, but the washer agitator does not turn in either a clockwise or counterclockwise direction, or 2) At end of cycle, clothes are gritty and soapy with water.
To find the cause of the problem, first check to make sure that the washer power cord has not worked loose in the wall socket. Read the rest of this entry »
Other specific symptoms include: 1) Food not remaining at desired temperature. 2) Compressor does not cycle ON.
Because the interior light is ON, the Fridge has the required electric power to operate.
Something is causing the compressor not to cycle ON. Check the components in the order that they are listed below. The most likely component at fault is the defrost timer, which could be stuck in the defrost cycle. The Fridge is then in a permanent state of defrost and does not cycle ON. However, if the compressor tries to start and the interior light dims, the problem is probably not the defrost timer or the thermostat; therefore, check the components of the compressor assembly starting with the starting relay. Read the rest of this entry »
The water supply that is controlled by a water inlet valve enters the mold cavity of the compact icemaker. The water then freezes in the icemaker mold. An electric heater thaws the frozen ice crescents so that they can be ejected from the mold. An electric motor then drives an ejector blade through a cam assembly, which frees the released crescents. The crescents revolve in a clockwise rotation and tumble into the ice storage bin. Read the rest of this entry »
Move the refrigerator out from the wall. Unplug the refrigerator power cord, and turn OFF the water supply to the icemaker.
Using hand tools, remove screws and discard the defective water supply valve. When installing a water supply valve on the water heater, install only on the cold-water side of the water heater. Read the rest of this entry »
The automatic dishwasher starts the cycle once the homeowner has placed the dishes in the dishwasher and the timer is pushed in or pulled out to ON. With the unit ON, electricity flows through the timer contacts to the water inlet valve solenoid. As the solenoid opens, hot water flows through the inlet valve, the inlet hose, and then into the dishwasher tub cavity. Read the rest of this entry »
Specific failure symptoms include: 1) The dishwasher won’t complete the dishwasher cycle. 2) The dishwasher has a burning smell during the cycle.
Check the dishwasher wiring for a possible loose connection where it connects to the house wiring.
Check for a circuit breaker in the circuit breaker panel that is defective.
Check the dishwasher timer assembly for erratic operation. If the dishwasher suddenly started when the timer dial is pushed to the ON-OFF position, the timer assembly ON-OFF contacts are defective internally. You will have to replace the timer assembly in order for the dishwasher to program through the cycle properly. Read the rest of this entry »
Specific failure symptoms include: 1) When the dishwasher is turned ON, nothing happens. 2) When the dishwasher is turned ON a “buzzing” sound is heard.
To find the cause of this problem, first check to be sure the electricity is turned ON at the circuit breaker panel. Next, check to see that the dishwasher timer knob is pushed in or pulled out to the ON position when selecting a cycle. Read the rest of this entry »
