The information given here also applies to the grills on many cookers. This is a simple way to ascertain if the control is faulty. Short circuit failures on elements may damage regulators in which case, if you are in any doubt, renew it.
The following test is for a single circuit application, that is, a single element. For double regulators, that is, a double element, the same procedure will be required on both single and double operations of the switch. From off position an anticlockwise turn will put into circuit one element (usually the inner), a clockwise turn from the off position will put into circuit both inner and outer. Check that double regulators operate independently on a half turn each. For singles, use ony a full turn. Read the rest of this entry »
These are among the most frequently used items in the home. Generally, they are very reliable, but when a problem does occur, it is usually at the most inconvenient time. Over the years, ovens and hobs have become increasingly complex with the addition of digital timers, touch controls and other refinements.
It is essential to remember that these appliances are connected directly to the mains supply and, as with any repair, cleaning or service, must be completely isolated. In this instance, the main double-pole isolation switch for the appliance must be switched off and also the fuse for the cooker/hob circuit removed from the main distribution board. If an MCB is fitted in place of a fuse, ensure it is in the off position. Do not proceed with any repair or service if both these requirements are not met and also make sure you advise others who may use the switch of your intentions. Read the rest of this entry »
