Turn OFF the electricity at the circuit breaker panelbefore servicing the dishwasher. Exercise care when moving the dishwasher from its space. The leveling legs can easily damage the floor.
Turn OFF the electricity at the circuit breaker panel. Remove the screws that secure the lower panel to the dishwasher cabinet. Disconnect the drive motor connector from the harness wiring. Remove the hose clamp from drain hose that is secured to drive motor base coupling. Remove drain hose from coupling. NOTE: When removing drain hose, place a small pan or towel under the motor base coupling. It is possible that when hose is removed water could spill onto the floor. Read the rest of this entry »
Specific failure symptoms include: 1) Dishwasher has a full tub of water at the end of the cycle. 2) Dishwasher only partially drains and leaves water in tub at end of cycle.
Remove the lower panel. Locate the pump drain hose and see if a kink in the hose is evident. If so, remove the kink and check the dishwasher for proper operation. If the dishwasher now pumps the water out, you found the problem — a kinked drain hose. If little or no water is being pumped out, the problem is in the dishwasher pump assembly. Read the rest of this entry »
