Specific failure symptoms include: 1) An unusual smell in the laundry room. 2) The top of the dryer is very hot to the touch. 3) The clothes are extremely hot and wrinkled at the end of the cycle.
When a dryer is overheating, the first concern should be whether the heater element is cycling (turning ON and OFF). An easy check is to set the heat selector to a heat position and turn the timer to the ON position. With the dryer running, turn the overhead lights OFF. Check the back of the dryer (with the back panel removed). On left-hand side of cabinet there should be a visible glow from the heater box. This glow would indicate that the dryer is heating and has the required voltage. After a period of four to six minutes, the heater should cycle off and the glow should fade. If not, then probably the dryer cycling thermostats or adjustable thermostat is not functioning properly. You will have to replace the defective thermostat(s) in order for the dryer to operate properly. Read the rest of this entry »
Unplug the Fridge power cord before servicing the Fridge. Move the Fridge out from the wall. Use extreme care when moving the Fridge, because the Fridge legs can easily damage the floor.
Open the Fridge door and locate the control console in the back of the Fridge cabinet. Remove the screws that secure the console cover. Remove the thermostat bracket. NOTE: Before removing the defrost timer from the Fridge cabinet, mark the wires, so they can be replaced correctly on the replacement part. Next, remove the screws that secure the defrost timer to the Fridge cabinet. Next, remove wiring harness and remove defrost timer. Read the rest of this entry »
