Specific problems include: 1) The clothes dryer has excessive noise while running. 2) The clothes dryer stops in cycle. 3) The clothes are extremely damp when removed from the dryer drum at end of cycle.
All of the above symptoms are related to mechanical problems which develop from years of use.
Check the clothes dryer drum belt for excessive play or a stretched condition. A drum belt that is excessively stretched will cause the idler pulley to bang against the drum, resulting in excessive noise. In order to restore the dryer to proper operating order, you will have to replace the drive belt. Read the rest of this entry »
Unplug refrigerator power cord. Using hand tools, remove the icemaker from the freezer section of the refrigerator. Remove the front cover from the icemaker. Remove the front component plate that is secured to the ice maker support housing. Remove the screws that secure the cycling thermostat to the icemaker support.
Remove electrical wires from the terminals on the support housing, and carefully remove the thermostat. Read the rest of this entry »
Unplug refrigerator power cord, open the refrigerator freezer door, locate the compact icemaker and place your hand on the ejector blade. Turn it slowly in a clockwise direction. If the icemaker ejector blade continues to turn unaided, the problem is a defective icemaker holding switch. The icemaker holding switch can be checked with the volt/ohmmeter. First, set the ohmmeter to the RX-1 scale. Next, place the probes of the volt/ohmmeter on the terminals of the holding switch. With the switch button depressed, you should see full-scale deflection (continuity), on the scale of the volt/ohmmeter. No reading on the ohmmeter means the holding switch is open and must be replaced. Read the rest of this entry »
