These operate at elv (extra low voltages) between 3 and 12 V. The single bell, buzzer and many models of chimes are powered by dry batteries but the more powerful chimes and intricate bell systems have to operate from mains transformers. Usually a transformer is preferable for any bell or chimes. Where an illuminated bell push is used a mains transformer is essential as the lamp of the push would exhaust a battery in a day or so. Read the rest of this entry »
A fused clock connector is a small non- switched fused outlet designed expressly for supplying a mains electric clock.
The unit is in two sections: a fixed base which is connected to the fixed circuit wiring, and another section in.the form of a flat pin plug which plugs into sockets in the base. The plug section carries the flex of the clock and contains the fuse. The plug is secured in the base by a retaining screw. This prevents the plug being pulled out accidentally and stopping the clock. Read the rest of this entry »
A basic understanding of electricity is essential, even for those who do not intend to carry out any repairs or servicing of appliances. Ignorance is no protection against your own or someone else’s errors and oversights, whether with repairs, servicing or installation.
Power is supplied to an electricity substation at a very high voltage — 400,000 volts — in three-phase form. There it is converted, via a transformer, to 230 volt single-phase for distribution to our homes. In normal circumstances, current flows from the live supply of the substation’s transformer, through the electrical appliances used in the house and back via the neutral conductor (cable) to the substation transformer’s neutral pole (a closed loop). Read the rest of this entry »
